Manual cover hook removal is challenging, time-consuming and dangerous. The OneVision Model 700A Seam Stripper easily and safely removes the cover hook for tightness inspection or measurements. The Seam Stripper can also be used as a bottom cutter.
OneVision’s 700A Seam Stripper accommodates aerosol cans, food cans, beverage cans, and paint cans. Strip the cover hook off a can in just 15 seconds and change wear parts in minutes. Simple. Rugged. Precise.
Safe by Design
No need to hold the can during operation. Operators keep one hand on the run switch and the other on the lift table handle, keeping hands away from the can throughout the stripping process.
• Reliably strips slotted cans
• Simple, easy cover hook removal
• Precise, dedicated stripper head for each can size
• Quick stripper head change and can positioning
• Captures stripped seam segments
• Utilizes precision stripper head with four cutter wheels
• Single control for height set and stripper feed
• Rugged drive system for low maintenance
• Accommodates 200×100 to 700×800 aerosol, food, and paint cans
• Typical time to strip one seam: 15 seconds
• Typical time to change stripper heads: <30 seconds
• Typical cutter wheel life: >6 months
• Minimal maintenance except cutter wheel replacement
• Replace cutter wheels without adjustment
• Optimal stripper head speed for safety
• Weight: 63 lbs.
• Dimensions: 16” x 12” x 30”
• Power Requirement: 115/230 VAC 50/60 Hz
Need a quote or interested in learning more?
Fill out the form and we will be in touch.
